Dammit Electric 75cm

The all new Dammit Electric V2 is now available. This 75cm is very quick to build and is a great sport flyer. The all New Dammit Electric V2 is an ideal travel companion. Capable of flying in a wide wind range from 7 to 30mph with a blistering roll rate and a suprising speed range.

So what has changed on the new Dammit Electric V2?

• Lighter Overall construction
• Increased wing span for even lower wing loading and further improved low speed.
• Optional Rudder as standard on all kits
• Servo are buried within the wing with just the servo arms and pushrods exposed.
• D box sub ribs for a smoother leading edge and reduced drag.
• All Balsa Ribs.

The speed range and roll rate are breath taking yet the Dammit is capable of landing at a crawl or near stationary in a headwind. The stall is pretty much none existent to optimised wing sections and blunt leading edge.
The wing just nods slightly and never drops a wingtip or bites. On low rates and a 5x3 prop and 3s 1000mah this is a great sport model and would suit anyone with aileron experience. However drop on a 5x5 Prop and 3s 1000s and the beast starts to come alive, increase the control throws and the roll rate becomes a blur, and the rate of turn in high G corners is more like a computer game than real life!. All this on a low cost 2205 2300kv brushless motor normally used on quad copters. Drop in a 2207 2600kv motor and 4s high C 650mah packs and you had better be prepared. The Dammit now covers the sky at alarming rates, As the speed increases the rate or turn and the roll rate just increases too. You thought our Blink was fast? Well think again!

Kit Contains
Laser cut ply and balsa wood parts
Hardwood dowel leading edge
3d printed control horns
Carbon fibre pushrods
Plastic snap links for pushrod ends
Magnets for the hatch catch
Full sized plan
Pre cut vinyl Dammit text logo
Optional 3 Colour Vinyl decal set.

Tech Spec
Wing Span: 750mm
Wing Chord 245mm
Flying weights sub 250g possible.

Recommend RC Equipment
2 or 3 AWD503MG Metal geared servos
25 - 40 amp ESC dependent motor choice
2205-2300kv to 2207-2600kv Brushless motor
5x3 - 5x5 2 bladed prop
3s 1000mah to 4s 650mah High C lipo battery
Small 4 to 6 channel Receiver

Thanks to David Hogg and Peter Barrett for use of their photos.