HyperFlight 30A BLHELI-32 ESC with 5A SBEC

Good product. I guess there are smaller ESC's but this one does the job

These little beauties have never let me down. If you are flying an E-res model (2metre wingspan) then you can't go past one of these. Great value. As always great service and very quick to get to Australia. Thanks Neil.

Always Quick and good products from Neil and his team

Ive brought and used at least 10 of these units. They are very small , ideal for small powered gliders or any other model requiring 30A or less. They come with brake on to assist prop folding. They can be adjusted if you have BL heli 32 software on your PC but I always use them out of the box. I noticed that some of my fellow modellers have what appears to be random beeps if you dont activate the ESC for 10mins. This is the Lost Model Alarm or Beacon (in the software). This too can be set to off but I haven't felt the need

These are good units, compact and reliable, which I've bought before. I've tested this one but it's not in use yet.

This is an excellent, highly recommended, very compact unit. Sets itself up and therefore easy to use. Had initial problem with jittering on prop at motor start which was easily cured by using a start delay (ramp start) on my tx motor settings.

Ottimo e leggero

Simply amazing. Ideal for light ships. Will let electrons flow easily. Using it with a 2S Lipo.

Great service as usual. Fast delivery and esc works great.

Ordered the ESC and CAM Height Limiter in the afternoon and delivered next day lunchtime. Great service. All fitted that evening and really pleased with the performance. Looking forward to this years competitions. Thanks Neil.

very good product very easy to program using BLHELI 32. if using a switch to turn on the motor you have to program a delay ( 1 sec is enough) otherwise the esc will shut down ..... this is a major concern when flying

This is my favorite ESC for F5L planes. It’s small, works great without any reprogramming.

Perfect ESC for F5L

Amazing ESC, use it in my Riddick wing with a T30 2800Kv motor and 3s Lipo. Is similar or the same to the 30A Vladimir's Model ESC, which is no longer available because of the war in Ukraine that sadly made Vladimir to stop activities for now. Great it is programmable with Arduino, but Hyperflight already prepared it with the right parameters for my use!

Ottimo prodotto

Excellent value

I can count on the same time for post delivery to nz. I get most parts from neil and never had a propblem.havnt. Used the latest ones yet. But I'm sure they will be as good as the other parts I have got. Always the first place i shop at

Great product, works great and great service. Thanks Hyperflight!

These are so good I bought another one.
Very impressive ESC. When you need to correct or change settings just connect up to BLheli suite with an Arduino nano and away you go.

Oh and as per usual Neil's service is terrific.

Great little ESC. Suits OzeRes and LARC 1806 perfectly.
,,and as usual Neil's service and delivery is superb.

Very happy with this controller for my T30 motor in my ERES Purito. I first used the Pulsar 15A but that was pretty unreliable.
Cheers.

This is a great little unit and finally (through no fault of HyperFlight) I have received my second HyperFlight 30A BLHELI-32 with SBEC & XT30 Plug. The freight time was a little longer than usual but I put that down to the COVID situation. Well done Neil and Staff.

Love this one,use it in my FIREBLADE from GCM !
Very speedy service from Neil,within 3 days in Holland 👍

This is a perfect speed controller for lightweight gliders of around 1.5 span. It is small and extremely light, approximately just 8 grams not including connecting wires. Neil has also programmed this ESC for gliders with the brake switched on. I have been using it in my Blaster and it performs perfectly and remain cool even after a sustained motor run. Just Excellent.