Hacker A10-7L 4.4:1 40g Geared Outrunner

Product Code: A10-7L-4-4

(2 reviews)

Price: $93.95

Description

This Hacker A10-7L includes 4.4:1 gearbox to allow the motor to turn a large, efficient prop and produce great thust, even at low currents.

Mount the powertrain using two M2 bolts 7mm long (not included).

When using a 3S LiPo and a 12" or 13" diameter prop it will give a great climb on a 2m RES glider weighting up to 700g. Not really suitable for use on a 2S LiPo as a 15x8 or larger prop would be required.

See the last image for the specifications.

Setup Recommendations
Motor	Hacker A10-7L 4.4:1
Battery	Bonka LiPo 3S 300mAh, Bonka HV LiPo 3S 520mAh, Radient LiPo 3S 450mAh, 3S 300 - 800mAh LiPo,
ESC	HyperFlight 28A BLHELI-32, HyperFlight 30A BLHELI-32, HyperFlight 40A
Prop blades	CN 12x6, GM 12x8, GM 13x8
Spinner (for 30mm firewall)	30mm GM F5J Spinner, 3mm Split Collet for GM Spinners, 30mm CN-U Spinner, 3mm Collet for CN-U, 30mm Ali Spinner

More details

A10 Manual [559kb]

Reviews 2

01/12/2024 19:23

Review by: Anonymous

Addendum

And the drive shaft is quite short so you need a thin firewall and a 10mm central hole to get the gearbox as far up into the nose as possible.
Mine is mounted to a 1.5mm plate with is then screwed onto the front of the model.

01/12/2024 19:11

Review by: Anonymous

Excellent motor

Good motor, drives a 13x8 prop pulling 10 amps on a 3s battery, gives a vertical climb on my x-res circle dancer.
Two things to be aware of:
Mounting screw holes are very close to the centre so you have to be careful drilling the firewall.
If you don't have good ventilation the heat from the motor soaks through to the gearbox and eventually the drive pinion separates from the motor drive shaft. The good news is that it's very easy to take the gearbox off and reattach the pinion with high strength locktite.